当前位置:首页 > 产品展示 > 德国BURKERT/宝德电磁阀 > BURKERT(宝德)电磁阀 > 501095德国BURKERT两位两通电动比例阀简介
详情介绍
德国BURKERT两位两通电动比例阀简介
The valve features a linear stepper motor as actuator. The integrated electronics simplify the process integration;
additional actuation modules are not necessary.
直接作用式比例阀型号 3280 适用于在密封式
或开放式调节回路中计量液体和气体。
集成式电子装置简化了流程体化,
see ordering chart) available) Closure time 2.5 sec. (0…100 % stroke) Fluid temperature 0 to + 70 °C
Ambient temperature - 10 to + 60 °C Viscosity Max. 600 mm²/s (cSt) Power supply 24 V DC ± 10 % (max. residual ripple 10 %)
Power consumption < 1 W in holding position max. 8 W (DN2 − 6) resp. max. 12 W (DN8 & 10, as well as high-pressure versions)
型号 3280 有比例阀标准款、带集成式位置调节仪的规格
以及带集成式过程调节器的规格三种可选。
The motor’s power consumption to hold a specifi c opening position of the valve is zero.
This key feature can reduce the energy consumption of a plant dramatically and thus make it more effi cient.
Type 3280 is available as standard ON/OFF or proportional valve,
阀门通过线性步进电机驱动。
德国BURKERT两位两通电动比例阀简介
• Versions: Standard, positioner, process controller and high pressure version up to 22 bar
低电功率消耗
额定宽度从 DN 2 6 mm
规格:标准款、带位置调节仪款、带过程调节器款
Actuator isolated from fl ow path • Excellent range and fast response times
• Low power consumption • Orifi ce sizes 1 to 10 mm
The direct-acting motor valve of Type 3280 is used for dosing of liquids and gases in closed or open control loops.
Duty cycle Up to 100 % (depending on fl uid and ambient temperature) Port connection G or NPT ¼, ⅜, ½, fl ange, Cartridge
(on request) Typical control data2) Hysteresis Repeatability Sensitivity Span < 5 % < 1 % FS < 1 % FS 1:100
Protection class - valve IP54 Installation As required, preferably with actuator upright Status display LED
并且不需要使用额外的控制模块。
夹持特定的阀门孔眼时,电机不需要能源。
Medium Neutral gases, liquids Pressure Range1) 0…6 bar (high pressure version up to 22 bar (depending on orifi ce size,
(details: see manual) Dimensions See drawings on page 6 − 7 Weight ~0.7 kg
这特性可大幅度降低设备对能源的需求,从而使其更为高效。
as version with integrated positioner and as version with integrated process controller
Technical data Materials Body Housing Seals
Brass or stainless steel PC (Polycarbonate), PPS (Polyphenylene sulfi de) FKM, others on request (NBR, EPDM, ...)
非介质接触式驱动器
出色的调节范围及快速的反应时间